These posts will chronicle my journey as a fatally nostalgic masochist. I am continually drawn to the "old ways" and history, methods, and means of the low technology past.
Friday, March 29, 2013
My Troubles With The Bitz
I recently switched up my fletching jig from a relatively non-adjustable inexpensive model and picked up a used Bitzenburger jig. This jig is very adjustable and the “gold standard” in fletching jigs. I figured it would only help my arrow making prowess.
I set up the jig with a left helical clamp and went to work trying to adjust the clamp properly on my test shaft. It seemed to align perfectly.
Then I started fletching my first dozen arrows and began to have problems. It seemed that when I rotated the receiver to put on feather #2 and #3 they did not make contact from leading edge to back. I ended up with a few that had gaps in the glue line.
After some time I finally figured out the problem. The newer mercury speed nocks and bohning classic nocks I had been using have a fairly high indexer on them. When I first aligned the jig I made my adjustments based on the cock feather position. The indexer on the nock was making contact with the nock receiver and preventing it from being perfectly centered. Once I rotated the receiver the misalignment was magnified.
I ended up taking my broadhead file to the indexer for a few swipes and my problems were solved!
The picture below has a vintage Bear archery POC nock, along with my modified nock, and the original unaltered nock.
Another lesson learned…. Once again I find that sometimes our “improvements” in design as not always the “best”.
Friday, March 22, 2013
A Day in the Woods
I got to take a day off from Daddy duty yesterday and spend the day in the woods. Call it a kind of mental sanity day. With Mom and Jr. off to work and daycare, I was able to finish spray capping a dozen arrow shafts while I waited for Mike to arrive. Shortly, we headed out to public land to look for sheds, scout turkey, and shoot at targets of opportunity (roving/stumping) with the longbows. I think we covered a majority of the land and got to exercise our lungs on some of the steeper elevations above the river. We walked from 9am until 1:45pm. Who knows how many miles we covered once we decided to break for lunch.
After lunch we headed back to my mountain home and took a few more hours of walking up that slope. We did manage to find one shed that had already started sun fading, probably dropped early this year. Luckily the squirrels and rodents had not chewed it yet.
That evening we were both pooped and reveled in a successful day. My shooting could have been better, but I'll work on it. I broke about 7 of the cedar arrows I carried in, but none of the 3 douglas firs. That really shows the toughness of the two shafts in comparison.
Mike's new bow was working well for him!
Thursday, March 14, 2013
All In The Family
My first bow when I was a small boy was a flimsy fiberglass stick with a twine string that fired wooden suction cup-tipped arrows. I can remember as I got older I pulled off the suction cup and sharpened the shaft in a pencil sharpener. I soon moved up to green and red fiberglass “flight bows” sold by Sears and Montgomery Ward. My nephew still has my first real hunting bow. It was an Indian archery duel shelf plastic-tipped green fiberglass bow of 45 pound weight. I took to the fields in chase of my nemesis the ground hog.
My father was born in 1929 and he became a bowhunter presumably after the struggles of the depression allowed “frivolous pursuits” in game. His father was a big water fowler on the Susquehanna River, but doubt he did much bow hunting. My father’s bow was a tan solid fiberglass Ben Pearson takedown longbow of 60 pound pull. I can remember this bow as it was retired having had the lower limb tip ground off from years of abuse. He then purchased s Bear Whitetail compound bow and I have found memories of shooting with him in the front yard of our home. He shot with a calf hair tab and I could not get over the speed of his aluminum arrows compared to mine.
My brother started killing deer with a Jennings Sidekick 3 after a few years of hunting with Dad’s Ben Pearson. I bet he was the reason for the ground off tip. He was ten years older than me. I do know he helped pick out my first compound bow in the winter of 1987. It was a browning Deluxe Nomad II wood risered beauty. I remember him telling me he was so impressed it was super light at 3 pounds compared to his all metal arrow slinger. I shot this bow with a glove and no sights and had 4 fletched 2219 aluminum shafts tipped with 4 blade Satellite broadheads. It took me many years to collect my first yearling doe and that was after missing it with the first shot from an old wooden platform nailed to a locust tree. Truly culling out the dumb ones on that hunt, but you never forget the first….especially when it was such a long hard road.
My brother again was responsible for introducing me back into traditional archery after years of shooting modern compounds and releases and all the crutches and gadgets that came with it. He gave me his fist longbow after buying a custom Rio Bravo Long curve. The bow he gifted was a 60 pound @ 28 inch Earl Hoyt Jr. Sky Archery Trophy Longbow. I skeptically brought this bow on a late season January 2006 hunt. I was sitting on a chestnut oak stump as darkness started to settle when a conga line of over 15 deer soon engulfed my position. I had deer all around and one pesky fawn within 8 yards of me behind a mountain laurel bush threatened to blow the whole deal. That’s when I finally got an opportunity to loose an arrow at a mature doe as she stepped out from behind the Y of a branched trunk. I heard a solid thunk and saw her blow out with tail down! I was certain I hit her well and was as excited as I had ever been….that is until I realized my arrow with bear razorhead was embedded in the Y trunk of that tree. But I was hooked!
The following September found me with longbow in hand and I have never hunted with the compound since. I hunted again from the ground on a stool when one sultry September afternoon another young button buck stepped right toward me and gave me an 8 yard shot. The shot selection was poor as he was quartering toward me. I sat there brimming with adrenaline and at the same time frustration at such a dumb shot. Then it started to sprinkle rain. Great…. Suddenly I saw an adult doe break the tree line of the firebreak I was just inside of and come jaunting by. I drew back on her with no intention of shooting. I held and held….and she was still closing in and coming broadside at 12 yards. I couldn’t take it anymore and loosed. The woodsman tipped arrow blew through her ribcage and she exploded down the hill followed by the sounds of thrashing and crashing….then silence. I found her easily enough and called my pal Brent to help me track the small one. We did not find him as rain started to come down heavy. We decided to butcher the deer we had in hand and I would go back the following morning before the heat of the day spoiled any meat. The temps were up around 60 degrees that night and I was doubtful, but I found him about 80 yards from the shot site and only the loins were spoiled from contact with gut contents. I was lucky and learned a great deal on that hunt. This was my first, “real first”, deer. I can see those events like they just happened yesterday.
My brother made me promise to never sell that Hoyt bow. This year he has another in-law that wanted to switch from compound to trad, so I kindly repaid the offer and gave him the bow that started it all for me…again. That is the beauty of life and hunting…we continue to learn and start over. Each time we do and it makes things harder and then the resulting success ends up being that much more memorable. That is what it is all about.
Late December my wife gave birth to our son Garrett. He will have his own path to follow in life, but I will be sure to help him along with as much of my values, ethics, and family traditions that he will accept.
Friday, March 1, 2013
A Traditional Shave
The more I learn about "The old days" the more knowledge I find forgotten. I have been long using the old style shave soap and brush/mug technique to lather up my whiskers. I found the "modern" aerosol can and costly shave cream to be wasteful and a poor value. The solid shave soap lasts a long time and the works pretty darn well. However I was still using my old plastic disposable razors. Something just did not feel right about the chinsy plastic "tool", so I began to look elsewhere. I was enthralled with using the old straight razor method my old barber used to employ (I have been cutting my own hair now for several decades), but fearful of cutting open an artery in a groggy state of confusion some early morning.
I wanted to try the old style "safety razor". These little beauties have been around for a long time and I found a new version of that style at the Duluth Trading Co.
I received the razor and immediately felt that this tool was substantial. No flimsy piece of junk here. The all metal head was solid and the handle was short but well balanced. The look was classy and antique.
Then I tried her out. All I can say is WOW! A benefit of this style is that the hot water makes the metal head very warm to the touch and that soothes the skin as you shave. It felt marvelous! I was also skeptical that the single flexible blade would be better than the triple-bladed over-engineered plastic wonder I had been using. My fears were unfounded. This razor gives a very close and comfortable shave.
I am now looking at flea markets and stores for a deal on a vintage razor kit so I can save this one for travel (in my classy leather travel case by the way).
Anyway, I am glad I gave this a try and I doubt I will ever go back to the plastic shavers again.
Until next time..... "Happy Hunting"